Grup Perlindungan Denmark
Protection Group Denmark TQR 2.0 Plate Carrier
Pembawa pelat TQR 2.0 is a protection system made from 500D Cordura, designed by Protection Group Denmark for tactical operations. It features laser-cut MOLLE and quick-release buckles.
Construction: Made from 500 denier Cordura laminate with laser-cut MOLLE.
Resilient Fabric: Abrasion-resistant and weather-resistant, according to Protection Group Denmark.
Cable Routing: Laser-cut MOLLE on the shoulder pads for efficient cable routing.
Slim Profile: Slim, minimalistic profile intended for agility in confined environments.
Quick-Release Buckles: Italian-made 2M buckles for quick release.
Pembawa Pelat TQR 2.0 - Perlindungan.
Pembawa pelat TQR 2.0 is a protection system with 500D Cordura construction and quick-release buckles, manufactured by Protection Group Denmark. Protection Group Denmark describes the 500D Cordura laminate as a balance between durability and weight.
Tinjauan Operasional:
Pembawa pelat TQR 2.0 is designed for military and law enforcement personnel. Protection Group Denmark describes its 500D Cordura laminate as abrasion-resistant and weather-resistant, while the quick-release buckles facilitate rapid removal. Its slim, minimalistic profile is intended for agility in confined environments.
Aplikasi:
- Operasi taktis militer
- Misi penegakan hukum
- Perlindungan personel keamanan
- Skenario respons cepat
- Operasi lapangan dengan mobilitas tinggi
Fitur Utama:
- Konstruksi: 500D Cordura laminate with laser-cut MOLLE.
- Kain yang tangguh: Abrasion-resistant and weather-resistant, according to Protection Group Denmark.
- Slim Profile: Slim, minimalistic profile intended for agility in confined environments.
- Gesper Pelepas Cepat: Italian-made 2M buckles for quick release.
- Bahu yang nyaman: Empuk dengan anyaman poliamida tinggi, kekuatan putus 1472 kg.
- Perutean Kabel yang Efisien: Molle yang dipotong dengan laser pada bantalan bahu.
Protection Group Denmark - Produsen:
Protection Group Denmark, based in Denmark, specialises in tactical gear and protection systems for military and law enforcement needs.
About Protection Group Denmark and MSS Defence:
Protection Group Denmark A/S is a Danish-owned company headquartered in Randers, Denmark, that manufactures and sells bulletproof and stab-proof vests, bulletproof helmets, hard armour plates and other ballistic equipment. MSS Defence supplies the TQR 2.0 Plate Carrier to defence and police organisations in Europe on quotation, with one point of contact from enquiry to delivery.
Pertanyaan yang Sering Diajukan.
-
Ukuran apa yang dapat diakomodasi oleh pembawa pelat TQR 2.0?
Pembawa pelat TQR 2.0 tersedia dalam ukuran Sedang dan Besar. Ukuran sedang cocok untuk pelat S & M ESAPI dan 30×25, sedangkan ukuran besar cocok untuk pelat L ESAPI. -
Bagaimana cara kerja sistem pelepasan cepat?
The carrier uses Italian-made 2M buckles, allowing for rapid release. -
Apakah pembawa pelat TQR 2.0 kedap air?
Protection Group Denmark describes the 500D Cordura laminate as weather-resistant and abrasion-resistant. -
Bahan apa yang digunakan dalam konstruksi TQR 2.0?
The carrier is constructed from 500D Cordura laminate, which Protection Group Denmark describes as balancing durability and weight.
Spesifikasi
- Ukuran M (cocok untuk pelat S & M ESAPI dan 30×25)
- Ukuran L (cocok untuk pelat L ESAPI)
- Gesper pelepas cepat dari 2M™ Italia
- Laminasi 500d Cordura™ ASLI dari Foxa Oy
- IRR aman
- Specified for use from -20°C to +60°C
- Spesifikasi untuk pembawa pelat TQR 2.0
- Spesifikasi Pelat baja keras
- Ukuran Sedang menerima:
- 227 * 303 mm / 8,75 "x11,75" (S ESAPI)
- 246 * 323 mm / 9,5 "x12,5" (M ESAPI)
- 300 × 250 mm / 10 × 12″
- Ukuran Besar menerima:
- 265 * 342 mm / 10,25 "x13,75" (L ESAPI)
