Protection Group Dinamarca
Protection Group Denmark TQR 2.0 Plate Carrier
El portaplacas TQR 2.0 is a protection system made from 500D Cordura, designed by Protection Group Denmark for tactical operations. It features laser-cut MOLLE and quick-release buckles.
Construction: Made from 500 denier Cordura laminate with laser-cut MOLLE.
Resilient Fabric: Abrasion-resistant and weather-resistant, according to Protection Group Denmark.
Cable Routing: Laser-cut MOLLE on the shoulder pads for efficient cable routing.
Slim Profile: Slim, minimalistic profile intended for agility in confined environments.
Quick-Release Buckles: Italian-made 2M buckles for quick release.
Portaplacas TQR 2.0 - Protección.
El portaplacas TQR 2.0 is a protection system with 500D Cordura construction and quick-release buckles, manufactured by Protection Group Denmark. Protection Group Denmark describes the 500D Cordura laminate as a balance between durability and weight.
Resumen operativo:
El portaplacas TQR 2.0 is designed for military and law enforcement personnel. Protection Group Denmark describes its 500D Cordura laminate as abrasion-resistant and weather-resistant, while the quick-release buckles facilitate rapid removal. Its slim, minimalistic profile is intended for agility in confined environments.
Aplicaciones:
- Operaciones tácticas militares
- Misiones policiales
- Protección del personal de seguridad
- Escenarios de respuesta rápida
- Operaciones sobre el terreno de alta movilidad
Características principales:
- Construcción: 500D Cordura laminate with laser-cut MOLLE.
- Tejido elástico: Abrasion-resistant and weather-resistant, according to Protection Group Denmark.
- Slim Profile: Slim, minimalistic profile intended for agility in confined environments.
- Hebillas de liberación rápida: Italian-made 2M buckles for quick release.
- Hombros cómodos: Acolchado con cincha de poliamida de alta resistencia a la rotura de 1472 kg.
- Enrutamiento eficiente de cables: Molle cortado a láser en las hombreras.
Protection Group Dinamarca - Fabricante:
Protection Group Denmark, based in Denmark, specialises in tactical gear and protection systems for military and law enforcement needs.
About Protection Group Denmark and MSS Defence:
Protection Group Denmark A/S is a Danish-owned company headquartered in Randers, Denmark, that manufactures and sells bulletproof and stab-proof vests, bulletproof helmets, hard armour plates and other ballistic equipment. MSS Defence supplies the TQR 2.0 Plate Carrier to defence and police organisations in Europe on quotation, with one point of contact from enquiry to delivery.
Preguntas frecuentes.
-
¿Qué tamaños admite el portaplacas TQR 2.0?
El portaplacas TQR 2.0 está disponible en tamaño mediano y grande. La mediana se adapta a las placas S & M ESAPI y 30×25, mientras que la grande se adapta a las placas L ESAPI. -
¿Cómo funciona el sistema de cierre rápido?
The carrier uses Italian-made 2M buckles, allowing for rapid release. -
¿Es el portaplacas TQR 2.0 resistente al agua?
Protection Group Denmark describes the 500D Cordura laminate as weather-resistant and abrasion-resistant. -
¿Qué materiales se utilizan en la construcción del TQR 2.0?
The carrier is constructed from 500D Cordura laminate, which Protection Group Denmark describes as balancing durability and weight.
Especificaciones
- Talla M (se adapta a las placas S & M ESAPI y 30×25)
- Talla L (se adapta a las placas ESAPI L)
- Hebillas de cierre rápido de la marca italiana 2M™.
- ORIGINAL 500d Cordura™ laminado by Foxa Oy
- TIR segura
- Specified for use from -20°C to +60°C
- Especificaciones del portaplacas TQR 2.0
- Especificaciones Placas de blindaje duro
- La talla mediana acepta:
- 227 * 303 mm / 8,75 "x11,75" (S ESAPI)
- 246 * 323 mm / 9,5 "x12,5" (M ESAPI)
- 300×250 mm / 10×12″.
- La talla grande acepta:
- 265 * 342 mm / 10,25 "x13,75" (L ESAPI)
